REED KONTAKT 1XMAAK OPBOUW MET KABEL 23X13,9X5,9MM 0.5A 10W

Features
• Sensors from the MK- series are magnetically operated reed proximity switches for direct PCB mounting. The sensor should be mounted onto a fixed surface with the actuating magnet on the moving surface.
• The reed switch and permanent magnet must remain at a certain distance apart. Approximation resp. removal of the magnetic field determines the closing and opening of the Reed switch.
• The magnetic operate sensitivities are divided into different AW classes.
• The contact is made of ferromagnetic reeds which are melted within a gas-proof glass tube.
• The parallel ends overlap each other to form a magnetic gap.
• Due to a magnetic field the contact paddles take opposite polarity and close with sufficient strength.

Application
• Keyboard applications
• Lever hoists

Switching Capacity: 10W
Switching Voltage: 200Vdc
Switching Current: 0,5A
Carry Current: 1,25A
Contact Resistance: 150mW
Breakdown Voltage: 225Vdc
Initial Excitation: 10...19AW