STRIPPER

Features
• Accurate, fast and safe stripping of: data cables, control cables, patch cables, telephone lines and bus lines
• Allows the dismantling of special cables with a diameter between 4 and 10mm and an insulation thickness of 0.2...1.4mm
• The working range of the Weicon data-Strip can be adjusted according to the cable size (between Ø 0.2...0.8mm)
• The tool has an integrated side-cutter for massive cables of max. Ø 2mm; data-cables of max. Ø 8mm
• Safety tested by TÜV Nord

Application
1. Open the locking. Inner blade can be adjusted by turning the small wheel, for different thicknesses of 0.2...1.4mm
2. Put the cable (Ø 4...10mm) between the blade and turn the stripper 2...3 times around the cable
3. Pull off the outer isolation
4. Adjust the turning wheel again. Put the stripped cable in and make a small cut in the screen film by turning the stripper 2...3 times around
5. Adjust the length cut from 3.5...14mm, in steps of 1.5mm
6. Adjust the working range according to cable size, Ø 0.2...0.8mm
7. Strip the wire
8. Cut the wire. Side-cutter for massive cables of max. Ø 2mm; Data-cable of max. Ø 8mm